This model also has a "Copy" mode where you can basically just press copy to easily replicate the pre-programmed settings that you have already made for other days. So, if you want to set the same temperatures and / or on - off at the same time for numerous days, just input the details once then press copy for as many days as you want those same settings to be used. Job done. Hi. I have just inherited one of these controllers in a house I have bought to rent out. I have put 3 sets of good quality batteries in it so far, and none of them has lasted longer than 3 weeks! The unit seems to work fine, and the internal light goes out, so I can't imagine what is draining the batteries. Any thoughts? Cheers. Is this a software issue in the thermostat or is it faulty and needs replacing. It is only 3 months old. Normally on reaching the setting temperature rising it seems to cycle as if the differential is too low but the heating system is not noisy so I have accepted this. First, choose your thermostat from the menu below. Then follow the directions for the type of reset you need. Try a different reset if the one you tried does not fix the issue.

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.directheatingsupplies.co.uk/pdfs/Basic%2520Wireless%2520Thermostat%2520Guide.pdf&ved=2ahUKEwiW0pLnntDsAhXDaRUIHdwyAgkQFjAAegQIEhAB&usg=AOvVaw2F1wr9JFBYRcQhi9CQnZVZ&cshid=1603647662917 Also the temperature offset of say + up to 3 degrees means that it will operate as if it is set 3 degrees higher. I had by Baxi boiler installed and they used a Center EHE0200361 RF Programmable room Thermostat in April 2016, the problem is that it displays the wrong temperature, my wife got up at 3 AM to go to the loo and had a look at it and it said that it was 19 degrees, there was no way that it was anywhere near that, we've also compared it with a normal thermometer and it reads high, is there anything I can do or does it need replacing? i am trying to replace a faulty Honeywell CM907 with this Center product. The wiring on the CM907 is to A and B terminals only to switch a valve. Would this be the same on the Center as when i try the relay box does not light up?

ALL OFFERS

I have one of these programmers but would like to know if I can do the following...as an example...programme set to come on at 6am , go off at 8am...but I get up at 5am and need heat...is there a way to override the timed programme so I can press a button so that I can manually put the heating on at 5am and know it will go off automatically at 8am as per the pre programmed time ??...its doing my head in ! Another issue was I had the target temp set at 19'c from 0900 to 1600hrs and as it was a warm sunny day I manually reduced the target temp to 12'c at 1200hrs but I noticed at 1330hrs the heating came on as it overruled my manual command and there it was blasting gas up the chimney for no real reason when I told it not to, the room was 19.5'c and the preset temp was 19'c and it was still firing the boiler. Congratulations! You’ve reset your device! You can now configure your device for its new settings via the “+” icon, or “Add new device” button on your Resideo App. I also have a problem.I set the heating on 6 and off at 10 am , start it again at 7 pm and off at 2 am but it seems the heating keep being on all the time. It was firing the boiler when the ambient room temperature was higher than the target temperature which is not right. I did improve its performance by adjusting the parameters but it still fired the boiler many times when the room was at the required temperature through solar heat which is a waste of money and taking life out of the boiler.

My center remote control keeps asking for the date to be set, 4 times a day sometimes, so the heating wont come on until you set it.

MESSAGE US

Congratulations! You’ve reset your device! You can now configure your device for its new settings via the “+” icon, or “Add new device” button on your Resideo App. You can also configure your thermostat on the thermostat screen itself using the Installation Guide. I have just had a new combi boiler installed, using the same wireless room thermostat, and I'm having trouble figuring out how best to use it. If it makes any difference, the boiler is in the loft, the RF Room thermostat is in the hall, probably 12 ft away On a recent cold night I decided to set the overnight temperature from the standard 5deg C to 15 so the boiler would operate in the middle of the night if it went cold. It had been operating set at 20 when we went to bed and shut off as expected. It was coming down in temperature. I was woken at 2-15 with the heating coming on (as expected). The problem was it ran for about 5 mins and shut down. After only 1min it fired up again and continued cycling like this. It did not run long enough to get the bedroom radiator even warm. The heating system is a bit noisy before it settles down on a normal early morning warm up and this cycling could not be tolerated to see if the cycling time extended and gave some heat out to the bathroom and landing radiators. The thermostat seemed to see it as the system had reached the required temperature. I've reconnected my 20 year old Danfoss TP5 5/2 day and it works 100% as I requested, my gas bill will be lower and my boiler will last a lot longer. I wouldn't recommend you buy this stat or the Honeywell CM707 as it's exactly the same but if you do keep the gas engineers number handy, cause you might need him to repair your boiler.

I deliberately woke up and went downstairs in the middle of the night and it was absolutely freezing everywhere, yet the thermostat was still saying 18.5 in the living room so there's no way it would ever fire the heating to warm the house on a cold night unless I raised the overnight temp to 19. Glad you are making progress, you seem like my wife who feels the cold and psychologically needs to feel a radiator on, even if the thermometer is reading a high. Nevertheless it is how you feel then that’s what matters.I am having the same trouble as the first comment. If I just want to advance the heating, I want it to turn off again at the preset time. It is so inconvenient and I want a different controller. Does anyone know any other compatible controllers? My boiler does what it likes too. I might as well not bother setting any temperature at all. Driving me nuts. Hi there. If my memory serves me correct, there is a way to do this. Pretty sure you can just programme two timers for the same day / morning. So, the first one comes on at 5am and goes off at say 5:50. Then the second comes on at 6am and goes off at 8am. Hi - the green light on mine keeps going off. there's no red light or green light and the heating goes off. I can't find this combination of problem online. You could always just extend the time if you can't be bothered to search through the settings any longer, so it comes on a 5am and goes off at 8am. Best bet is to look through the manual if you haven't already. See the link below.