Silverline Pipe Bender Guide 15mm (MS124/15)

Product Information

The wrinkle-resistant plate (10) is fixed on the wrinkle-resistant seat (12), with the arc seat of the wrinkle-resistant plate close to the bending die (8). The front end should be as close as possible to the center of the wheel die, and the rear end of the wrinkle-resistant plate should be parallel to the guide die with a difference of 1-2 degrees to reduce friction between the wrinkle-resistant plate and the workpiece. Handling and Installation of Pipe Bender Large circular arcs not only increase the workload but also are limited by the size of the tube bender. To install the guide die, follow the same method as above, but adjust the clamping force to be slightly looser than that of the main clamping die. It is strictly prohibited for non-designated personnel to operate the equipment. In general, people must leave the machine and stop. In case of an emergency when operating the pipe bender, press the emergency stop button, turn the twist switch to the manual position, and reset it manually. In case of failure, please report for repair in a timely manner. Maintenance of Pipe Bending Machine

When adjusting the cylinder speed manually, the rotating arm must be rotated to over 900, and the adjustment speed must be synchronized with the linear velocity of the rotary elbow’s edge. Pushing the speed higher than the edge of the rotary mold in manual mode is prohibited. In manual mode, press the action button to drive the corresponding oil cylinder and observe whether the action is normal without crawling, pulsation, and oil leakage.In the process of pipe bender mold manufacturing, NC pipe bender mold is used in almost all links, such as forming mold, hot mold, cold mold, plastic mold, etc. When operating the pipe bending machine, ensure that no one enters the space within the rotating arm’s sweep. All personnel must be prohibited from entering the area of the rotating arm and the pipe fittings while the machine is in operation. Users who require high bending accuracy and efficiency of the hydraulic pipe bender are very concerned about the quality. The quality is determined by the internal configuration of the equipment. The hydraulic system component can utilize either commercial accessories or aircraft hydraulic accessories.

The hydraulic pipe bender is a common plane winding automatic bending machine and has the advantages of multiple functions, reasonable structure, simple operation, convenient movement, and fast installation. It is used in electric power construction, highway and railway construction, boilers, bridges, ships, furniture, decoration, and more. Hot bending, the representative model is the medium frequency pipe bender. Working Principle of Pipe Bending Machine Upon completion of the bending, loosen the oil release screw, and the plunger will automatically reset.When a pipe has only a few bending positions or several bending angles, there can be only one bending radius because the module of the pipe bending machine cannot be changed during the bending process. This is known as “one pipe corresponding to one die”. Before starting up, the operator should carefully read the instructions and be familiar with the safety precautions, performance, and operating specifications of the machine tool. Pipe benders can be categorized into two types: CNC pipe benders and hydraulic pipe benders. They are widely used in the construction of power plants, highways and railways, pipeline laying and repair in boilers, bridges, ships, furniture, decoration and other industries.

The position of the oil cooler relative to the machine tool should be determined according to the actual operating position.The numerical control pipe bender can perform winding bending with one or two bending radii for pipes in a cold state and is widely used in the bending of various pipe fittings and wires in industries such as automobiles and air conditioning.