Exterior Wood Stain (Red Cedar) - Quick Drying and Easy-to-Apply - Concentrated Wood Stain for Outdoor Wood, Garden Furniture, Windows & Cladding - 250ml

Product Information

This is an interior dark barn red oil-based stain produced by Rust-Oleum. The performance rate of the red pigments of this stain is high because it is intensified with nano-pigment particles. As a result, it gives a deep barn red color with just one coat and provides long-lasting protection. Wood conditioners work by filling in the pores of the wood, creating a more uniform surface for the stain or finish to adhere to. This helps to prevent the stain or finish from pooling in the pores, which can lead to blotchy coloration. Wood conditioners also help to raise the grain of the wood, which can give the wood a more pronounced grain pattern.

Another way to go about it is through color mixing. Green color pigment or green colored dye helps to tone down red stains. Hence, you can add this green pigment to your red wood stain or apply it to the red-stained surface to reduce the tone of the red color. But for surfaces already treated with water-based stains, another water-based product needs to be used. Previous water-based stains won’t allow oil-based stains to penetrate, causing them to pool on the surface and offering very little protection. Added Protection Enhances the wood grain: A wood conditioner can help to enhance the natural beauty of the wood grain.You can read more about the best way to stain wood in another of our interesting posts. How to Maintain Western Red Cedar The brush-on, oil-based formula does two jobs in one. First it stains the wood, then protects it with a layer of tough polyurethane. It can be applied directly to bare wood, without needing a primer, and can also be used over old stains or varnishes. Stripping is not necessary; all that’s required is a light sanding to provide adhesion. Two coats are recommended, with 6 hours between each.

The climate: If you live in a humid climate, an oil-based stain may be a better choice than a water-based stain. Water-based stains can be more susceptible to fading and staining in humid climates. With a fine wood like western red cedar, the most frequently asked question is what finish to apply and how to apply it. But there is also a strong case going for unfinished western red cedar. What happens if it is left untreated? So, to paint or stain cedar weatherboards? Or possibly leave them untreated? There’s no right or wrong answer: your choice will depend on your design preference and required level of protection. These will help remove rust marks, but here again, wash the wood thoroughly on completion of the job. It can be difficult to find exactly the right color stain for cedar, but the Minwax range goes a long way to solving that problem. There are 28 shades in all, and each comes as either a satin or gloss finish.

Here, you will get better penetration into the wood, resulting in a more pronounced color change, and maximum protection from the elements. Read more about the different types of finishing oil in another interesting post of ours. Natural Water-based Finish Prepare the wood: Before staining cedar wood, it is important to prepare the surface. This includes sanding the wood to remove any dirt, dust, or imperfections. You may also want to use a wood conditioner to help the stain penetrate the wood evenly. Not only does the Defy Extreme stain enhance cedar surfaces, but it also has some other desirable traits such as UV light protection and low-VOC (volatile organic compounds) content. The recipe includes zinc, the same ingredient found in sunscreen, to prevent the sun’s UV rays from damaging a cedar surface. This stain is easy to apply with a brush, roller, or sprayer, and its water base makes it easy to clean with soap and water. For renovation works, one coat applied to the clean and dry surface is usually sufficient. Recoating

Apply the stain. Apply the stain evenly to the wood using a natural bristle brush, as mentioned earlier. Be sure to work in the direction of the wood grain. Apply two coats of stain for best results unless you have used a wood conditioner, and you can see that one coat is sufficient. Be sure to wipe away any excess stain after a minute or two. Use a high-quality stain, too. Cedar wood is comparatively inexpensive, so you can afford to use a higher grade of stain. With a little care and attention, you can stain cedar wood to create a beautiful and lasting finish.

Ordering British Western Red Cedar Timber

Fast drying dual-purpose wood stain and preserver for indoor and outdoor wood. Prevents wood deterioration and breathes new life into the wood with a UV-resistant fade-free colour scheme. Hybrid stains combine a bit of both worlds. Generally, these stains use water as the main base but also contain penetrating oils to soak into the wood. They’re lower in VOCs than oil-based stains and generally clean up with mineral spirits. However, hybrid stains aren’t wildly popular yet. Rust-Oleum Cedarwood Stain: This stain is a semi-transparent, oil-based stain that adds a hint of color to the cedar wood while still allowing the natural grain to show through. It is available in a variety of colors, so you can choose one that will match your décor.