Certain brands have mounting kits that have custom dimensions for their televisions, but you can also buy kits that have weight ranges that will fit a variety of television brands. If you don't want to buy a kit, you'll typically need to have the following tools on hand: The edge of the studs are attached with screws directly through the drywall. For the best hold, screws for your wall mount should go in a minimum of 3/4”.

While you may have already had a television on a stand in the room, choosing the best place for your wall-mounted unit is a little more complicated. It’s often helpful if you have another person available to assist in the placement and an extra hand when needed. Use painter’s tape (the blue stuff) to mark the position on the wall. It comes off easy without damaging the wall. Consider these points when choosing the best location: Now that your TV is mounted to the wall, you’ll want to make sure you can get the optimum audio and video capabilities from it. Whether you’ve got a Smart TV or standard model, you’ll need to access all the ports to connect your game consoles, DVRs, computers, sound systems, media players, and streaming devices. Access to the HDMI, component, optical digital, and other ports will ensure your TV delivers the highest-quality picture and sound. Step 8: Secure the Cables Behind the TV We recognise that time is of the essence when it comes to your projects, so we offer a next working day delivery service as standard on the majority of our products **After the holes are drilled, attach the mount to the wall with the screws provided. You should feel some resistance as you screw into each stud. If not, you may have missed the stud. The tilting version will work better if you intend to mount it above eye level as it gives the ability to tilt your TV screen 45 degrees down. This will give you an optimal viewing angle plus help you reduce glare and reflections from windows and lamps. It can also be pushed flat against the wall when not in use. Pull the mount off the wall and hold a level along the marks to make sure your TV will hang straight. It’s best to put 2 holes in each of the studs (2 top and 2 bottom) to keep the mount tight to the wall. If you or the intended recipient are not available when the delivery is attempted a delivery card will be put through your letterbox, or the courier will send a text. Please follow the instructions to rearrange delivery.

The type of mount you decide to use will be based on your particular application and what you’d like to do. Fixed mounts (static) are attached to the wall in one position and cannot be adjusted. This is the most affordable design and easiest to install. The fixed type will work best if you plan to mount it at eye level (approximately 42” off the ground), don’t need access to the rear ports, and don’t plan on moving it. Steel hollow-wall anchors have a maximum weight limit of 100 pounds and are the strongest of all the drywall anchors. How much weight can drywall hold without a stud? No wall studs? No problem. There are a few other methods for installing your flat-panel TV on the wall.

The wall surrounding the final spot should be obstruction-free (no windows, tall cabinets, or doorways.) Tips: Locations where glare and reflection through windows on sunny days or lamps at night should be avoided. While many homeowners are positioning TVs above a fireplace, it is not recommended unless there is a mantle or protective heat shield separating the TV from the heat of the fireplace. Step 2: Prepare the Mounting Kit You Need We use 3rd party couriers, due to this delays might happen outside of our control which might impact on the out for delivery time. Yes, you can use drywall anchor bolts such as toggle anchors or molly bolts. They can hold up to 100 pounds and secure your TV to the wall without needing wall studs. Can the TV fall off the drywall?